1. Position door so bottom edge is inside tub / shower.

2. Mark screw hole locations on both walls

1. Drill 3/16" (5mm) holes.

2. Insert drywall anchors. (Toggle bolts for mounting to fiberglass showers not included.)

1. Screw mounting channels to wall.

2. Slide left and right doors into mounting channels.

3. Slide in mounting screw hole cover.

1. Adjust doors to fit tightly in center.

2. Align tops of doors.

1. Drill 1/4" (6mm) hole through entire jam assembly at each pilot hole.

2. Install push rivets.

3. Caulk door where it contacts wall or tub/shower.